Newport GW6300 Rugged & Industrial Single Board Computer

The GW6300 SBC is a member of the Gateworks 6th generation Newport family of single board computers.

This family of SBCS is designed for a wide range of indoor and outdoor networking applications, including IoT Edge Routers. Built for rugged & industrial applications, this embedded single board computer features 2 Gigabit Ethernet ports, 3 Mini-PCIe slots and quality that comes from being Made in the USA.

Not Recommended for New Designs - End of Life Notice

 Key Product Features
Processor: Cavium OcteonTX™ Dual Core ARMv8 800MHz
RAM: 1 GByte DDR4
Flash: 8 GBytes eMMC
Ethernet: Two Gigabit Ports (see Features tab below for PoE details)
Mini-PCIe: Three Sockets (see Features tab below for details)
WiFi/BLE: Use Mini-PCIe Cards (Optional) (see Accessories tab below)
Cellular: Use Mini-PCIe Modem (Optional) (see Accessories tab below)
GPS: u-blox ZOE-M8 (Optional)
Size: 105 x 100mm
Software: Linux Ubuntu and OpenWrt Board Support Packages
Development Kit: GW11042 (see Ordering tab below)
Features
  • GW6300 SBC - Dual Core 800MHz ARM SoC, 1GByte DDR4 and 8GBytes eMMC Flash Memory
  • GW6304 SBC – Quad Core 1.5GHz ARM SoC, 2GBytes DDR4 and 8GBytes eMMC Flash Memory, GPS & CAN
  • Micro-SD™ Flash Expansion Sockets
  • Three High-Power Mini-PCIe Sockets
  • Socket 1: PCIe or GW1608x Expansion, USB 2.0
  • Socket 2: PCIe or mSATA, USB 2.0
  • Socket 3: PCIe or USB 3.0, USB 2.0, SIM
  • Two Gigabit Ethernet Ports
  • Two USB 2.0/3.0 Ports up to 5Gbps Super Speed
  • Two RS232 or One RS232/422/485 Serial Port
  • Digital I/O, SPI, and I2C Expansion
  • Digital 3-axis Accelerometer/Magnetometer (Optional)
  • Real Time Clock with Battery Backup
  • Voltage and Temperature Monitor
  • Serial Configuration EEPROM
  • Programmable Watchdog Timer
  • Programmable Fan Speed Controller
  • Programmable Shut-Down and Wake-Up
  • Tamper Switch Support
  • Ublox ZOE-MQ8 GNSS GPS Receiver with PPS Standard on GW6304
  • Microchip MCP25625 2.0B CAN Bus Controller Standard on GW6304
  • Barrel Jack Input Voltage Range 8 to 60V
  • Ethernet Jack Passive PoE Input Voltage Range 10 to 60V
  • Ethernet Jack 802.3at PoE Input Voltage Range 37 to 57V
  • Input Voltage Reverse and Transient Protection
  • Typical Operating Power GW6300 6W@25C, GW6304 8W@25C
  • -40C to +85C Industrial Operating Temperature
  • Optional PCIe Expansion for Additional Mini-PCIe, Legacy Mini-PCI, or Gigabit Ports
  • Optional Maxim DS28C22 Secure Authentication and Encryption
  • Form Factor Compatible with GW5300 Ventana Media SBC
  • Linux OpenWrt and Ubuntu Board Support Packages
  • Fansink installed by default (not pictured)
  • 1 Year Warranty
  • Made in the USA
  • High quality rugged & industrial design
Specifications
Documentation
Ordering Options

The GW6300 embedded SBC features the Cavium OcteonTX™ ARMv8 SoC processor. Two Gigabit Ethernet ports allow for LAN/WAN or input/output functionality. Three Mini-PCIe expansion sockets allow for support of 802.11abgn/ac wireless radios, LTE/4G/3G CDMA/GSM cellular modems, mSATA drives and other PCI Express peripherals.

A wide-range DC input power supply provides up to 15W to the Mini-PCIe sockets for supporting the latest high-power radios and up to 15W to the USB 2.0/3.0 jacks for powering external devices. Power is applied through a barrel jack or an Ethernet jack with either 802.3at or Passive Power over Ethernet. Open source Linux is optimized for the ARM CPU which includes Ubuntu and OpenWrt. This relatively small single board computer is only 105x100mm which allows it to appropriately fit in rugged and industrial embedded applications.

Being made in the USA, this SBC is well suited for military and other applications that require a high-quality and reliable product. This SBC is unique with 3 Mini-PCIe slots which allow for many different radios, including the GW16130 Satellite modem, GW16126 LTE CATM1 modem and GW16122 Sub-1GHz radio for Internet of Things networks and more.

Knowledge Base / Wiki

View the wiki for in-depth Linux software support, downloads and tutorials