GW16140 / GW16141 / GW16147 / GW16148 Mini-PCIe to M.2 Adapters
The GW16140/GW16141/GW16147 are Mini-PCIe to M.2 Adapters designed to allow support of M.2 5G Cellular Modems on Gateworks single board computers. The GW16148 Mini-PCIe to M.2 Adapter is designed for NVME SSDs.
| Key Product Features | |
|---|---|
| Function: | Converts Mini-PCIe slot to M.2 B-Key Slot for 5G Cellular Modems & Other M.2 Cards (GW16140/1/7) M-Key Slot for NVME SSD (GW16148) |
| M.2 Key: | B-Key (GW16140/1/7) M-Key (GW16148) |
| SIM Slots: | Dual Nano SIM (GW16140/1/7) |
| M.2 Card Length: | 52, 50, 42 & 30mm |
| Example Modems: | Telit FN980M |
| For Use On: | Gateworks Industrial SBCs |
- Mini-PCIe to M.2 Cellular Modem & NVME Adapter
- M.2 Key:
- M.2 B-Key Support (GW16140/1/7)
- M.2 M-Key Support (GW16148)
- Supports M.2 cards up to 52mm in length
- Dual Nano SIM Sockets (GW16140/1/7)
- GW16140 Supports USB 2.0 Modems
- Ventana/Venice Families - Verify Slot
- GW16141 Supports USB 3.0 Modems
- Newport Family - Verify Slot
- GW16147 Supports PCIe & USB 2.0 Modems
- Verify modem
- GW16148 Supports PCIe for NVME SSDs
- M-Key M.2 Socket
- Note: Uses 1x PCIe lane
- Supports NGFF Sizes
- 2242
- 3030
- 3042
- 3050
- 3052
- 1630 (Special Order)
- 2230 (Special Order)
- Minimal signaling to avoid pin conflicts
- Customized variations also available to support other M.2 peripherals
- -40°C to +85°C Operating Temperature
- Made in USA
The GW16140/GW16141/GW16147/GW16148 are Mini-PCIe to M.2 Adapters designed to allow support of M.2 Cellular Modems and other M.2 devices on Gateworks single board computers. Embedded Cellular Modems come in many form factors, including Mini-PCIe and M.2. The GW16140/1/7 adapters allow M.2 B-Key Cellular Modem cards to be plugged into a Mini-PCIe slot on a Gateworks Single Board Computer. The The GW16140/1/7 adapters feature dual Nano SIM slots for redundancy and switching between networks. Many Cellular Modems typically have pin signal conflicts with standard specifications, so these adapters only pass through the minimum required signalling to avoid these conflicts. The adapters come in different variants for different signalling. The GW16140 is used for modems that support USB 2.0 signals and the GW16141 is used for higher bandwidth modems that require USB 3.0 signalling. The GW16147 is used for PCIe modems with USB 2.0 as a control line. The GW16148 adapter allows for an M-Key NVME storage device to be used. Please note NVME drives often can use multiple PCIe lanes, the GW16148 only supports 1x PCIe. Many NVME drives used in consumer laptops have a extended length, longer than the maximum 52mm supported on the GW16148. Please consult the SBC Mini-PCIe slots compatibility for USB 2.0 or 3.0 support.
Note: Gateworks does not manufacture any 5G Modems. However, several 5G modems such as the Telit FN980M have been tested on the Gateworks SBCs. Read more on the Cellular Wiki Page
Note: Please refer to the Gateworks NVME Wiki Page for more information on NVME drives supported on the GW16148
*Disclaimer: This card has only been tested on Gateworks Single Board Computers. Gateworks only provides support when used on a Gateworks SBC.*
