GW11056 Wi-Fi HaLow Development Kit
A single board computer development kit designed to evaluate Wi-Fi HaLow that is CE-Ready, with 2 flexible sockets and 2 GbE Ethernet.
The GW11056 is a development kit to support the evaluation of our GW16159 Wi-Fi HaLow M.2 card. The kit is based on the Gateworks VeniceFLEX GW8200 Single Board Computer (SBC) pre-loaded with a Ubuntu Linux BSP to allow an out-of-the-box evaluation.
Key Product Features | |
---|---|
Contents: | Gateworks GW8201-S21 SBC
GW16159 Wi-Fi HaLow M.2 Card JTAG Adaper for Programming and Serial Console Access Antenna Adapter Cable AC/DC Power Supply Additional Accessory Cables |
Processor: | NXP™ i.MX 8M Plus Quad Core 1.6GHz ARM® Cortex™-A53 |
RAM: | 4 GBytes LPDDR4 |
Flash: | 64 GBytes eMMC |
Ethernet: | Two GbE Ethernet with GW168PB0 Adapter for Isolated 802.3at/af PoE |
Sockets: | Two Flexible Sockets for Wi-Fi/Cellular/BLE/NVMe (Mini-PCIe, M.2, etc) (see Features tab below for details) |
Video/Audio: | None |
Wi-Fi | Comes with GW16159 Wi-Fi HaLow M.2 Card |
Cellular: | Use M.2 Modem (see Accessories tab below) |
GPS: | u-blox GPS |
Software: | Linux Ubuntu Board Support Package (OpenWrt, Yocto, Buildroot Optional) |
Size: | 90 x 100mm |
Temperature Range: | Industrial (-40°C to +85°C) |
GW8200 Single Board Computer Features
- NXP™ 64-bit i.MX 8M Plus 1.6GHz Quad Core ARM
- 4GBytes DDR4-2133 SDRAM Memory
- 64GBytes eMMC Flash System Memory
- Dual GbE Ethernet Ports with GW168PB0 Adapter for Isolated 802.3at/af PoE
- Two High-Power FSA sockets
- FSA#1: USB 3.0, PCIe, SPI
- FSA#2: USB 3.0, PCIe, I2C, SDIO, SPI, UART and PCM.
- GW16FE0 - FSA to M.2 E Key (WiFi)
- GW16FB0 - FSA to M.2 B Key (Modems)
- Read more on the FSA Wiki Page
- 15W Available for Flexible Sockets (Mini-PCIe/M.2)
- Two GbE Ethernet Ports
- Front Panel USB Type-C 3.0 Host Port
- u-blox GPS Receiver with MMCX Antenna Connector
- TPM 2.0 Security Element
- Digital I/O & Analog Port, I2C & SPI Port
- RS232/RS485 and TTL Serial Port
- Dual Isolated CAN Bus Ports
- Digital 3-axis MEMS Accelerometer
- Real-Time Clock with Battery Backup
- Voltage and Temperature Monitor, Serial Configuration EEPROM
- Programmable Watchdog Timer
- 8 to 60VDC Input Voltage Range
- Power Through a Dedicated Connector or Ethernet with an optional isolated 802.3af/at Adapter
- 4W @ 25°C Typical Operating Power
- -40°C to +85°C Operating Temperature
- Ubuntu Linux Board Support Package
- 1 Year Warranty
- Made in USA
GW16159 Wi-Fi HaLow M.2 Card Features
- 802.11AH M.2 E-Key Wi-Fi Radio
- Silex SX-SDMAH 802.11ah Module
- Based on the Morse Micro MM6108 System-on-Chip
- IEEE 802.11ah Wi-Fi HaLow
- Simultaneous GATT Server & Client
- FOTA Support
- Up to 32.5Mbps data rate
- Supports 1/2/4/8 MHz bandwidth
- Access point and station mode
- Security: OPEN, WPA2-PSK(AES), WPA3-OWE, WPA3-SAE
- 903.5 ~ 926.5 MHz Frequency
- Up to +26.5dBm Transmit Power
- MHF-1 Antenna port
- Uses a standard Linux IP framework
- FCC Certified
- SDIO Communication
- M.2 E-Key Form Factor (2242) with SDIO Signaling
- -40°C to +85°C Operating Temperature
- Made in the USA
- 1 Year Warranty
The GW8200 is a member of the Gateworks 8th generation VeniceFLEX family of single board computers targeted towards multi-radio WiFi and 5G access points, gateways and routers. The GW8200 features the NXP™ 64-bit 1.6GHz i.MX8M Plus Quad Core ARM® Cortex™-A53 SoC, two GbE ports, 1GBytes of DRAM, and 8GBytes of eMMC Flash. In addition, there are two flexible expansion sockets (FSA) for Mini-PCIe or M.2 support. These FSA sockets can support a wide variety of M.2 keys and can be used for PCIe, USB, I2C, UART, SDIO, SPI & PCM peripherals. This flexibility will also enable the support of devices with SDIO or SPI interfaces such as 802.11ah HaLow and LoRa radios. The board additionally features Digital I/O, Analog Input, RS232/RS485/TTL Serial, I2C, SPI and dual isolated CAN busses. The board also includes a 3-axis accelerometer, optional GPS receiver w/PPS support and optional TPM 2.0 security element.
This SBC is CE-ready and has been designed to pass the stringent surge, burst and ESD requirements for CE industrial products. The Gateworks System Controller (GSC) provides embedded features such as a real-time clock, voltage and temperature monitoring, programmable pushbutton, and programmable board shut-down and wake-up for remote applications. A wide-range DC input power supply allows the board to be used in a variety of environments. Power is applied through a dedicated power header or over Ethernet using an optional isolated 802.3af/at Power over Ethernet (PoE) adapter (GW168PB0). An open-source Ubuntu Linux BSP is provided for quick product development.
Reference Links: