GW11056 Wi-Fi HaLow Development Kit

A single board computer development kit designed to evaluate Wi-Fi HaLow that is CE-Ready, with 2 flexible sockets and 2 GbE Ethernet.

The GW11056 is a development kit to support the evaluation of our GW16159 Wi-Fi HaLow M.2 card. The kit is based on the Gateworks VeniceFLEX GW8200 Single Board Computer (SBC) pre-loaded with a Ubuntu Linux BSP to allow an out-of-the-box evaluation.

 Key Product Features
Contents: Gateworks GW8201-S21 SBC
GW16159 Wi-Fi HaLow M.2 Card
JTAG Adaper for Programming and Serial Console Access
Antenna
Adapter Cable
AC/DC Power Supply
Additional Accessory Cables
Processor: NXP™ i.MX 8M Plus Quad Core 1.6GHz ARM® Cortex™-A53
RAM: 4 GBytes LPDDR4
Flash: 64 GBytes eMMC
Ethernet: Two GbE Ethernet with GW168PB0 Adapter for Isolated 802.3at/af PoE
Sockets: Two Flexible Sockets for Wi-Fi/Cellular/BLE/NVMe (Mini-PCIe, M.2, etc) (see Features tab below for details)
Video/Audio: None
Wi-Fi Comes with GW16159 Wi-Fi HaLow M.2 Card
Cellular: Use M.2 Modem (see Accessories tab below)
GPS: u-blox GPS
Software: Linux Ubuntu Board Support Package
(OpenWrt, Yocto, Buildroot Optional)
Size: 90 x 100mm
Temperature Range: Industrial (-40°C to +85°C)
Features

GW8200 Single Board Computer Features

  • NXP™ 64-bit i.MX 8M Plus 1.6GHz Quad Core ARM
  • 4GBytes DDR4-2133 SDRAM Memory
  • 64GBytes eMMC Flash System Memory
  • Dual GbE Ethernet Ports with GW168PB0 Adapter for Isolated 802.3at/af PoE
  • Two High-Power FSA sockets
    • FSA#1: USB 3.0, PCIe, SPI
    • FSA#2: USB 3.0, PCIe, I2C, SDIO, SPI, UART and PCM.
    • GW16FE0 - FSA to M.2 E Key (WiFi)
    • GW16FB0 - FSA to M.2 B Key (Modems)
    • Read more on the FSA Wiki Page
  • 15W Available for Flexible Sockets (Mini-PCIe/M.2)
  • Two GbE Ethernet Ports
  • Front Panel USB Type-C 3.0 Host Port
  • u-blox GPS Receiver with MMCX Antenna Connector 
  • TPM 2.0 Security Element
  • Digital I/O & Analog Port, I2C & SPI Port
  • RS232/RS485 and TTL Serial Port
  • Dual Isolated CAN Bus Ports
  • Digital 3-axis MEMS Accelerometer
  • Real-Time Clock with Battery Backup
  • Voltage and Temperature Monitor, Serial Configuration EEPROM
  • Programmable Watchdog Timer
  • 8 to 60VDC Input Voltage Range
  • Power Through a Dedicated Connector or Ethernet with an optional isolated 802.3af/at Adapter
  • 4W @ 25°C Typical Operating Power
  • -40°C to +85°C Operating Temperature
  • Ubuntu Linux Board Support Package
  • 1 Year Warranty
  • Made in USA

GW16159 Wi-Fi HaLow M.2 Card Features

  • 802.11AH M.2 E-Key Wi-Fi Radio
  • Silex SX-SDMAH 802.11ah Module
    • Based on the Morse Micro MM6108 System-on-Chip
    • IEEE 802.11ah Wi-Fi HaLow
    • Simultaneous GATT Server & Client
    • FOTA Support
    • Up to 32.5Mbps data rate
    • Supports 1/2/4/8 MHz bandwidth
    • Access point and station mode
    • Security: OPEN, WPA2-PSK(AES), WPA3-OWE, WPA3-SAE
    • 903.5 ~ 926.5 MHz Frequency
    • Up to +26.5dBm Transmit Power
    • MHF-1 Antenna port
    • Uses a standard Linux IP framework
    • FCC Certified
  • SDIO Communication
  • M.2 E-Key Form Factor (2242) with SDIO Signaling
  • -40°C to +85°C Operating Temperature
  • Made in the USA
  • 1 Year Warranty
Specifications
Documentation
Ordering Options

The GW8200 is a member of the Gateworks 8th generation VeniceFLEX family of single board computers targeted towards multi-radio WiFi and 5G access points, gateways and routers. The GW8200 features the NXP™ 64-bit 1.6GHz i.MX8M Plus Quad Core ARM® Cortex™-A53 SoC, two GbE ports, 1GBytes of DRAM, and 8GBytes of eMMC Flash. In addition, there are two flexible expansion sockets (FSA) for Mini-PCIe or M.2 support. These FSA sockets can support a wide variety of M.2 keys and can be used for PCIe, USB, I2C, UART, SDIO, SPI & PCM peripherals. This flexibility will also enable the support of devices with SDIO or SPI interfaces such as 802.11ah HaLow and LoRa radios. The board additionally features Digital I/O, Analog Input, RS232/RS485/TTL Serial, I2C, SPI and dual isolated CAN busses. The board also includes a 3-axis accelerometer, optional GPS receiver w/PPS support and optional TPM 2.0 security element.

This SBC is CE-ready and has been designed to pass the stringent surge, burst and ESD requirements for CE industrial products. The Gateworks System Controller (GSC) provides embedded features such as a real-time clock, voltage and temperature monitoring, programmable pushbutton, and programmable board shut-down and wake-up for remote applications. A wide-range DC input power supply allows the board to be used in a variety of environments. Power is applied through a dedicated power header or over Ethernet using an optional isolated 802.3af/at Power over Ethernet (PoE) adapter (GW168PB0). An open-source Ubuntu Linux BSP is provided for quick product development.

Reference Links:

Knowledge Base / Wiki

View the wiki for in-depth Linux software support, downloads and tutorials

Let's talk about your project.

Whether you're in the early stages of prototyping a new project or looking to enhance an existing one, our resources and expertise are tailored to meet your specific needs. Contact us for a recommendation.