COMING SOON: GW16162 Cellular M.2 Modem
The GW16162 is a family of cellular modem M.2 cards designed to provide internet connectivity for IoT applications utilizing rugged & industrial Gateworks single board computers. This family of modems are end-device-certified to provide a quick time to market cellular solutions and eliminates the need to take the device through expensive cellular PTCRB testing.
| Key Product Features | |
|---|---|
| Function: | Cellular Modem |
| Certifications: | AT&T, Verizon, FCC/IC and RED/GCF |
| Interface: | USB 2.0 |
| Form Factor: | M.2 B-Key 3052 |
| Software: | Software Wiki |
| Speeds: | LTE CAT4, 5G NR RedCap, LTE CATM1/NB2, LTE CAT1 BIS |
| For Use With: | Gateworks Industrial SBCs |
- Family of M.2 B-Key (3052) Pre-Certified Cellular M.2 Modems
- GW16162-1: LTE CAT4 (up to 50Mbps Up / 150 Mbps Down)
- GW16162-2: 5G NR RedCap (Available 2026)
- GW16162-3: LTE CATM1/NB2 (up to 5Mbps Up / 10 Mbps Down)
- GW16162-4: LTE CAT1 BIS (Available 2026)
- Uses Family of Telit CMB100 Modules
- USB 2.0 Communication
- Standard u.FL Connectors for Cellular/GPS Antenna ports
- Onboard 4FF nanoSIM slot for SIM support
- Onboard GPS/GNSS Receiver
- GPS, GLONASS, BeiDou, Galileo and QZSS Support
- Active and Passive Antenna Support
- FOTA Updates
- Uses standard Linux IP framework
- FCC/IC and RED/GCF Certified
- PTCRB End Device Verizon & AT&T
- Compatible with Gateworks Venice, VeniceFLEX and other Gateworks SBCs
- -40°C to +85°C Operating Temperature
- Made in USA
- 1 Year Warranty
The GW16162 is a family of end device pre-certified cellular modems in the M.2 form factor designed to provide cellular wireless communication to Gateworks Single Board Computers. The cellular modem is targeted towards networking and Internet of Things (IoT) applications. The GW16162 features a Telit CMB100 cellular module that is available in several different variations, including LTE CAT4, 5G NR RedCap, LTE CATM1/NB2 and LTE CAT1 BIS. This family of modems are end-device-certified with Verizon and AT&T. This provides a quick time to market cellular solutions and eliminates the need to take the device through expensive cellular PTCRB testing. The modems feature worldwide capabilities, with RED/GCF (Europe) and FCC/IC certifications. An onboard nanoSIM (4FF) slot is used on the module for SIM support. The Gateworks Single Board Computer communicates to the module using USB 2.0 signaling which is supported on M.2 B-Key connector interfaces. Compatible with the Gateworks VeniceFLEX SBC family and other Gateworks SBCs with an M.2 adapter. Standard u.FL antenna connectors are used on the module for cellular connectivity and GPS/GNSS connectivity. Antenna and cables are sold separately. Supported in the Gateworks Linux BSPs with standard IP framework.
For more details, such as cellular bands, etc please view the Telit CMB100 datasheet here.
*Disclaimer: This Cellular Modem M.2 Card has only been tested on Gateworks Single Board Computers. Gateworks only provides support when used on a Gateworks SBC.
