Ventana GW5530 Rugged & Industrial Single Board Computer
NOT RECOMMENDED FOR NEW DESIGNS
The GW5530 is a member of the Gateworks 5th generation Ventana family of single board computers targeted for small rugged & industrial embedded applications such as Unmanned Aerial Vehicles (UAV) equipment, digital signage, IoT and cellular gateways.
Key Product Features | |
---|---|
Processor: | NXP™ i.MX6 800MHz Dual Core ARM® Cortex™-A9 |
RAM: | 512 Mbyte DDR3 |
Flash: | 256 Mbytes |
Ethernet: | None (Use Mini-PCIe or USB Adapter) |
Mini-PCIe: | One Socket (see Features tab below for details) |
Video/Audio: | HDMI Out & Analog Video In |
WiFi/BLE: | Use Mini-PCIe Cards (see Accessories tab below) |
Cellular: | Use Mini-PCIe Modem (see Accessories tab below) |
GPS: | Optional |
Software: | Linux: OpenWrt, Ubuntu, Yocto & Android |
Size: | 35 x 100mm |
- NXP™ i.MX6 800MHz Dual Core ARM® Cortex™-A9 SoC Processor
- 512 Mbytes DDR3 SDRAM Memory
- 256 Mbytes Flash System Memory
- High-Power Gen 2.0 Mini-PCIe Socket with USB 2.0 Support
- Supports Full Sized Mini-PCIe Cards (Half Sized Optional)
- USB 2.0 OTG Port up to 480Mbps
- Three Video Inputs Support CVBS, Y/C, YPrPb
- HDMI 1.4 Output Port with Audio Support
- Digital and Serial I/O Expansion
- Real Time Clock with Battery Backup
- uSD/ SIM Socket Expansion
- Voltage and Temperature Monitor
- Serial Configuration EEPROM
- Programmable Watchdog Timer
- 9-axis inertial module (accel/gyro/magn)
- 8 to 60VDC Input Voltage Range
- 3W@25°C Typical Operating Power
- 7W Available for Mini-PCIe Socket
- Reverse Voltage Protection
- Optional u-blox EVA-M8M GPS Receiver with MMCX or U.FL Antenna Connector
- -40°C to +85°C Operating Temperature
- OpenWrt, Android Yocto Linux and OpenEmbedded Board Support Packages
- 1 Year Warranty
- Made in USA
- Rugged and Industrial design
The GW5530 features the NXP™ i.MX6 Dual Core ARM® Cortex™-A9 SoC processor operating at 800MHz, 512 Mbytes of DDR3 DRAM, and 256 Mbytes of System Flash. A Mini-PCIe expansion socket supports 802.11abgn/ac radios, 4G WiMAX radios, 3G CDMA/GSM cellular modems and other PCI Express peripherals. The composite video input and HDMI audio/video output make the GW5530 ideal for wireless video applications. The Gateworks System Controller provides embedded features such as real time clock, voltage and temperature monitor, serial EEPROM, uSD/SIM expansion and advanced power management with programmable board shut-down and wake-up for remote sensor applications. A wide-range DC input power supply provides up to 7W of power to the Mini-PCIe socket for supporting the latest high-power radios. Power is applied through a dedicated two-pin connector. OpenWrt, Android and OpenEmbedded Yocto Linux board support packages are supported. Although without a Ethernet port, the GW5530 can maintain network connectivity via an interface in the Mini-PCIe slot, including the GW16126 LTE CATM1 Cellular card, GW16130 Iridium Satellite Modem, GW16122 Sub-1GHz radio, 802.11ac/b/g/n WiFi or LoRA radio. A rugged and industrial design allows the SBC to be used in IoT Gateways, military, mining and other demanding applications. A slim profile and small footprint of 35x100mm means this SBC takes up very little room.
Please Note for Development:
- Developing without an ethernet port can be difficult, thus this Ethernet to USB adapter is suggested